,

BeIN Server Receiver


Compare

The beIN Media Server is an advanced high definition media server solution for beIN. It is designed to provide a platform for the delivery of content in the connected home across a diverse range of media devices.

free shipping for electronic
free shipping for electronic

917.00

BeIN Media Server Advanced Satellite Media Server Receiver – Type 3

About beIN Media Server

The beIN Media Server is an advanced high definition media server solution for beIN. It is designed to provide a platform for the delivery of content in the connected home across a diverse range of media devices.

A next generation product for the future-proof home, the DMS7000NBS delivers high performance with both wireless connectivity and 3D graphics capability.

The product features advanced dual full-band capture and SatCR to reduce cabling requirements to support its multi-tuner architecture.
This 4-tuner device allows future expansion to 8 tuners and the support for picture-in-picture and the delivery of content to multiple screens, including smartphones and tablets.

A variety of connectivity options are available including IEEE 802.11n/IEEE 802.11ac dual-band Wi-Fi, USB and Ethernet.
The DMS7000NBS is a powerful media server platform boasting a 3000+ DMIPS CPU, 2GB of system memory and a 1TB hard disk drive for media storage.

Complies with the latest EU regulations regarding power consumption.

Memory and Storage

RAM 2GB DDR3 rated 1866 MHz
Flash Memory 4GB eMMC, 4MB NOR
NVRAM 64KB Emulated in flash
Hard Disk Drive Internal SATA disk – 1TB, 3.5-inch

Front End

Input 2 x IEC 601 Female Inputs with full band captureand SatCR support
Tuning Range DVB-S/S2: 950MHz to 2150MHz
Tuner / Demodulators Dual full-band capture satellite tuners with 8 DVB-S/S2 demod paths. Compliant to ETS 300 421
Symbol Rate DVB-S 10 to 45 MSps
DVB-S2 18 to 30 MSps
Reported Signal Level -25dBm to -65dBm
LNB Polarisation 13/18V Control
LNB Supply 350mA continuous load per connector with
short circuit protection
LNB Tone Control 22KHz for high/low band selection
DiSEqC DiSEqC 1.1; SatCR

Video Decoder

Decoder Dual HD video decoder
Aspect Ratio 4:3 and 16:9
MPEG-4 Profiles MPEG-4 Part 10 MP[a]L3 720×576 at 50 and 25Hz
MPEG-4 Part 10 MP[a]L3.2 1280x720p at 60, 50 or 30Hz
MPEG-4 Part 10 MP[a]L4.1 1920x1080i at 60 or 50Hz
MPEG-4 Part 10 MP[a]L4.2 1920x1080p at 60 or 50Hz
MPEG-4 Amendments MVC, SVC
MPEG-2 Profiles MPEG-2 MP[a]HL
MPEG-2 MP[a]ML
Max Bit Rate 15Mb/s for Standard Definition
30Mb/s for High Definition

Audio Decoder

Decoder One audio decoder
MPEG-1 Audio Audio Layer I & II
MPEG-4 Audio MPEG-4 AAC HE L2, AAC HE L4, AAC5.1
Dolby Digital (AC-3) Dolby Digital Plus output over HDMI & Dolby Digital on SPDIF
Dolby Digital Plus down mix to stereo
Audio Video Output
Analogue AV Outputs None
Digital Video HDMI 1.4b
Digital Audio Optical (TOSLINK)

Peripheral Interface

USB 2 x USB 2.0 Type A, 500mA on rear panel
Ethernet RJ45 10/100M Base-T on rear panel
Wireless Dual band non-concurrent station/client operating in either 3X3 MIMO (3T:3R) 2.4GHz or 3X3 MIMO (3T:3R) 5GHz mode
WLAN standards supported 2.4GHz: 802.11 b, g and n
WLAN standards supported 5GHz: 802.11 a, n and ac

Front Panel Specification

Remote Control 1 x IR receiver
IR Frequency & Protocol 36 KHz, Philips RC5
Buttons 1 Button – Standby
LEDs 3 LEDs, 1 bi-colour (red/green) – standby/on, 1 red – recording, 1 red – command
Display 7-segment display white

Power Supply

External inline PSU, 100-240V AC Input, 12V DC Output
60W desktop design with figure-of-eight mains lead input
Power Saving Features
IBCM744 Integrated Power Management
Power Supply Energy Efficient Power Supply – EuP and CoC compliant

Accessories

User Manual 18-page start-up user guide
Mains Cable and PSU 60W desktop PSU with 2-pin EU-style power cord and
3-pin UK style power cord
Remote Control RCU and batteries
Cables HDMI (1.5m), Ethernet CAT-5E (2m

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “BeIN Server Receiver”

There are no reviews yet.